Saddle Hunting Public Land

Saddle Hunting Is Not a Trending Fad: It’s a Mainstay for Bow and Gun Hunters Alike 

If you’re picturing a cowboy with a lasso when you hear “saddle hunting,” you’re barking up the wrong tree. This isn’t your granddaddy’s deer stand; it’s what happens when innovation meets tradition in the woods. Saddle hunting is climbing the ranks in the deer hunting world, and it’s not hard to see why. With a nod to the modern hunter’s quest for flexibility, efficiency, and stealth, saddle hunting gear is like the Swiss Army knife of deer hunting. It’s compact, lightweight, and as silent as a whisper in the deer woods. Let’s dive into why this “newer” method isn’t just a blip on the hunting radar but a significant shift in how hunters engage with the wild.

Economic Trends: Climbing Higher Than Ever

The hunting industry has seen its fair share of trends come and go, but saddle hunting? It’s here to stay. The numbers don’t lie; more hunters are ditching the bulk for the belt, and manufacturers have taken notice. Brands like Latitude Outdoors lead the charge with innovative designs and products that ditch the metal clang for quiet efficiency. This gear is not just a purchase; it’s an investment in mobility and stealth.

The uptick in saddle hunting’s popularity isn’t just anecdotal. Retailers and online forums are buzzing, sales are up, and the aftermarket for used gear is as competitive as a rutting buck. The reason? Saddle hunting offers a blend of affordability and practicality that’s an attractive addition to a mobile hunter’s tool belt.

Benefits: Why Hunters Are Making the Switch

Increased Tree Selection on Public Land

Public land can be a mixed bag, but saddle hunters have the luxury of choice. No longer limited by the perfect tree, any sturdy trunk becomes a potential vantage point. This freedom opens up previously untapped areas, giving hunters the edge in crowded woods. 

Saddle Hunting Tree Selection

Quiet, No-metal Options

Gone are the days of echoing clanks scaring off your shooter buck. Brands like Latitude Outdoors are pioneering saddles that are as silent as a shadow. No velcro, no metal, just fabric, rope (line), and magnets stitched within the fabric keep their saddles quiet. As on Okayest Hunter that tends to make everything more difficult, or in this case louder than things ought to be in the deer woods, this is an incredible feature. However, this stealth factor is a game-changer for any hunter looking to keep their presence under wraps while they sneak within range of a shooter buck’s bedroom. 

Lightweight and Compact

Imagine fitting your entire tree stand setup in a backpack. Saddle hunting gear makes this a reality. In 2023 I went with the Latitude X-Wing platform that fits within my hunting pack. From there, I strapped Latitude’s Carbon Speed Series sticks to the outside of the pack and wore my saddle on my trek into the woods. I’ve never hunted like this in the past. It was and is my most compact mobile hunting system to date. Saddles are the ultimate solution for the hunter on the move, providing unmatched mobility without sacrificing comfort or safety.

Extra emphasis on the safety part. Especially as a Dad of three, climbing trees to chase the wiley Whitetail has never felt so risky to me until becoming a parent. Of course, tree stands are safe, too, and as a mobile hunter, you should always put safety first. I like always being tethered to the tree. 

Saddle Hunting Gear

Versatility in Shot Ranges

Traditional stands can limit your angles, but a saddle gives you 360-degree freedom. You can lean out from the tree, standing on your platform much like you could on a traditional hang-on stand. Conversely, and more commonly, with a saddle, you face the tree. This adds a component of extra concealment. This versatility means you’re ready for whatever comes your way, with a full range of motion at full draw. Just be sure to practice from the comfort of your backyard or a buddy’s so you can become familiar with navigating the bridge and become confident at full draw. It is a bowhunter’s dream to shoot from any angle.

It’s Not Just a Phase; It’s the Future

Saddle hunting represents more than just a shift in gear; it’s a new approach to hunting that prioritizes adaptability and stealth. As more hunters seek methods that enhance their ability to close the gap on a shooter buck or eater doe, saddle hunting stands out as a technique that brings us closer to heart-pounding hunts.

The economic trends in the hunting industry reflect this shift towards innovation and efficiency. With an ever-growing community of saddle hunters, online resources, and dedicated forums, this movement is clearly gaining ground. Saddle hunting is not just a passing fad; it’s a testament to the hunter’s evolving obsession with all things hunting. In the last few years, more events have emerged that focus solely on the mobile hunter. The Mobile Hunter Roadshow put on by Lone Wolf Custom Gear is a great show that lets hunters get hands-on experience with the new mobile setups. The Mobile Hunter Expo is another excellent example of how these saddle-hunting manufacturers have come together to meet the growing demands of the mobile-hunting consumer. 

Consider strapping into a saddle if you want to elevate your hunting game. It’s not just a tool in your belt; it’s your ticket to a more immersive, efficient, and thrilling hunting experience. Mobilehang-on stands aren’t going anywhere, and neither are saddles. It’s another tool in a mobile hunter’s arsenal. Remember, the best trends are the ones that bring us closer to what we’re after, and saddle hunting does just that. Welcome to the new age of deer hunting – where mobility, stealth, and versatility reign supreme.

2024 gun deer hunting season

The 2024 NDA Report: Summarized Insights into North America’s Deer Populations and Management Strategies

This is just a snapshot summary of the insights provided by NDA. If you’d like to learn more, we recommend reading the full report, linked at the end of this article. The National Deer Association’s 2024 Deer Report presents an in-depth analysis of the current state of deer populations, harvest trends, and the challenges and successes of deer management across North America. This comprehensive report draws on extensive data to offer a nuanced understanding of the factors influencing deer populations, the impact of diseases such as Chronic Wasting Disease (CWD) and Hemorrhagic Disease (HD), including Epizootic Hemorrhagic Disease Virus (EHDV) and Bluetongue Virus (BTV), and the evolving role of technology in wildlife management.

Key Findings and Trends

The report highlights a balanced age structure in the harvested deer population, with a significant portion of the harvest comprising older bucks. This trend suggests positive outcomes from wildlife management practices and a shift towards more sustainable hunting. Over 2.9 million antlered bucks and 3 million antlerless deer were harvested, indicating robust deer populations and successful management strategies across various regions.

  • Harvest Trends: The report indicates a significant shift towards a more mature age structure among harvested deer. For instance, in 2022, the percentage of antlered bucks aged 3½ years and older in the harvest was the highest ever reported at 42%. This reflects a successful outcome of wildlife management strategies aimed at promoting a healthier deer population and a more ethical hunting practice. It’s interesting to see this specific data point as it relates to the general climate of the hunting community when you consider the old adage of “Brown Down” mantra. It would seem even though a number of hunters chose to punch their tag on a spike buck or basket rack, the overall herd is considerably healthy. Moreover, hunters should feel comfortable punching their tag how they see fit, given how deer heard numbers are managed through various states’ licensing processes.
  • Antlerless Deer Harvest: The report also delves into the antlerless deer harvest, noting that over 3 million antlerless deer were harvested in 2022. This marks only the second time since 2013 that the antlerless harvest has topped three million, highlighting the effectiveness of current deer management strategies in maintaining balanced deer populations. It’s good to see hunters tagging does, especially in a day and age when harvesting mature bucks is at the forefront of most hunting conversations across the internet.
  • Harvest by Weapon Type: Analysis of the harvest by weapon type reveals a diversification in hunting practices. Muzzleloader hunters accounted for 9% of the total deer harvest, bow/crossbow hunters for 25%, and firearm (rifle/shotgun) hunters for 66% in 2022. This diversification not only reflects the evolving preferences and skills of hunters but also the regulatory changes that have expanded hunting opportunities. It’d be great to peel the numbers back a bit more to compare crossbow numbers exclusive to bow numbers rather than grouping them.
  • Regional Differences: The report identifies significant regional differences in deer harvests, both in terms of numbers and methodologies used. For example, in the Northeast, bow hunters accounted for the highest percentage of the harvest (33%), while in the Southeast, firearms were used for over three-quarters of deer taken.

Chronic Wasting Disease (CWD) and Hemorrhagic Disease (HD) Insights:

  • CWD has been identified in 32 U.S. states and several other countries, with no vaccine or cure available. It’s particularly fatal and spreads through direct contact and environmental contamination. CWD affects deer species including white-tailed deer, mule deer, elk, moose, and reindeer. Research indicates adult bucks have higher infection rates compared to does and younger deer.
  • HD, including EHDV and BTV, is transmitted by biting midges or flies and has been confirmed in deer across at least 16 states. While 2023 saw a surprisingly low HD year, the diseases pose significant threats to deer populations, especially in areas experiencing drought conditions, albeit with limited distribution and prevalence compared to the previous year.

Harvest Success Across States

Texas, Michigan, Pennsylvania, Wisconsin, and Missouri reported the highest buck harvest numbers, reflecting the effectiveness of their deer management and conservation efforts. The report underscores the importance of adaptive management strategies to maintain healthy deer populations and ensure the future of deer hunting.

The Impact of Technology

Trail cameras, including cellular cameras, have revolutionized deer management by providing real-time monitoring capabilities. These tools offer valuable insights into deer behavior, population dynamics, and the effectiveness of management interventions. Additionally, the use of drones for habitat assessment and wildlife management underscores the potential of technology to enhance conservation efforts, though it also calls for careful regulation to minimize disturbances to wildlife. There are strong opinions about cell cam and drone usage, and it’s important to note that things are evolving quickly as more legislation is introduced at the state level for some of these emerging technologies to be applied to the hunting realm.

Conclusion

The 2024 Deer Report offers critical insights into the challenges and successes of deer management in North America. It underscores the importance of sound management practices, the impact of diseases on deer populations, and the transformative role of technology in conservation efforts. As we move forward, continued research, innovation, and collaboration among wildlife professionals, hunters, and conservationists will be essential to ensure the health and sustainability of deer populations for future generations.

Read the full report here.

Public land bowhunter

The Intersection of Hunting Technology and Conservation

The hunting community faces a crucial turning point where technology, conservation, and outdoor traditions intersect. The conversations among hunters, once confined to the tailgate or the camaraderie at the local registration station, are now amplified through podcasts, social media, and digital forums. This shift has brought to light the challenges and ethical considerations facing modern hunting and public land management.

A reflective conversation has emerged as hunters increasingly share their experiences and insights on social media platforms and podcasts. It shows a growing awareness of hunters’ impact on some of the issues the same hunters are trying to solve. This discourse reveals a hunting community wrestling with the implications of its practices on wildlife populations and natural habitats.

One of the most pressing issues highlighted in a recent episode of the Okayest Hunter podcast is the overcrowding of public hunting lands. The proliferation of hunting apps and social media has democratized access to information, yet it poses a dilemma: How can hunters share their passion without compromising the landscapes they cherish?

Is public hunting land disappearing?

Good question. We don’t have the answer. It will be a good question to continue to think about and discuss as hunters work together to ensure our heritage stays intact for future generations. 

While specific technological tools like hunting apps, cell cams, and drones, to name a few, enhance the hunting experience, they also raise ethical questions about the balance between innovation and the principles of fair chase.

We gotta give credit where credit is due, though. Despite these challenges, the hunting community remains grounded in the values of camaraderie and conservation. Stories of mutual respect for our way of life illustrate a culture where hunters guide one another and embrace bringing others into the brotherhood. Of course, there are detractors, but negativity, unfortunately, always tends to be louder than positivity, even though it only accounts for less than 1% of the hunting community. The hunting community’s culture of sharing memories in the field and teaching others is still strong. 

It’s important the hunting community band together as we confront legislative and management decisions that could reshape the future of hunting. Various predator species have begun to be banned, and other hunting categories, like trapping, may end up on the legislative chopping board before we know it. Proposals such as banning doe hunting in certain areas as a conservation measure have already begun to spark vigorous debate in Wisconsin, highlighting the need for a nuanced approach to wildlife management that balances ecological needs with hunting traditions.

The evolving narrative of hunting culture reflects a larger conversation about humanity’s relationship with the natural world. While most people don’t hunt and don’t understand it, it’s essential for them to understand the deep connection that hunting provides with our ancestors. They also need to appreciate the respect that hunters gain from providing their own food. As a collective hunting community, hunters should remain positive and avoid infighting about trivial things like crossbows vs. compounds, treestands vs. saddles, public land vs. private, etc. Instead, hunters should remind non-hunters of the delicate balance between preserving traditions and embracing conservation responsibilities that our country was founded on.

As the dialogue continues, the hunting community stands at the forefront of a new frontier. It reminds us that respect for the wilderness and the ethical pursuit of outdoor pastimes pave the way for future generations of hunters.

Shed hunting continues to grow in popularity

The Rise of Shed Hunting: From Niche Hobby to Mainstream Activity

Whitetail shed antler hunting goes mainstream.

Has whitetail shed antler hunting gone mainstream? Shed hunting, a once niche hobby known only to a select few, has exploded in popularity, becoming a beloved outdoor activity for many. The Okayest Hunter podcast recently delved into this fascinating world, uncovering the history, challenges, and joys of searching for shed antlers. The episode offers a comprehensive look at the pastime’s allure and transformation over the years through personal anecdotes, expert insights, and engaging stories.

The Evolution of Shed Hunting

Shed hunting’s journey from an almost secretive practice to a widely embraced hobby is a testament to the power of community and social media. Initially, shed hunting was a pastime shared among a few, often passed down through generations as a way to connect with nature and wildlife. However, as social media began highlighting these adventures, it demystified the process and invited a broader audience to participate, significantly expanding the shed hunting community.

Personal Journeys into the Wild

The essence of shed hunting is not just found in the antlers themselves but in the stories of those who seek them. Many enthusiasts share a deep connection to their first discovery, recalling the anticipation and excitement of finding a shed antler. I’ve proudly hung my first shed in the Okayest Hunter podcast studio to admire daily using a RackHub RH1 mount. These personal narratives offer a glimpse into the diverse experiences that draw people to shed hunting, from the thrill of the hunt to the profound sense of connection with the natural world.

RackHub RHI antler mount

The Thrill and Challenge of the Hunt

Shed hunting offers a unique blend of suspense and satisfaction rooted in the unpredictability of the search. Hunters speak to the exhilaration of spotting a shed after hours or even days of searching, a moment that rewards patience and perseverance. However, this pursuit is not without its challenges. Successful shed hunting requires a deep understanding of animal behavior, weather patterns, and terrain, making each hunt a learning experience and a test of skill.

Building Community and Conservation

Beyond the individual pursuit, shed hunting fosters a sense of community among those who share this passion. It’s an activity that brings people together, creating bonds over shared experiences and discoveries. Additionally, shed hunting plays a role in wildlife conservation efforts, providing insights into animal populations and health and promoting responsible outdoor practices. It’s also a hell of a great excuse to deal with cabin fever, get outdoors, and scout for next season. Using intel from where you find sheds helps inform where bucks spend their time in the deer woods.

Shed hunting’s rise from a niche hobby to a celebrated outdoor activity reflects its wide-ranging appeal. It’s an adventure that offers something for everyone, whether it’s the challenge of the hunt, the thrill of discovery, or the beauty of nature. As more people are drawn to this pursuit, shed hunting grows, enriching the outdoor experience and connecting a diverse community of enthusiasts.

Derek Malcore of the Okayest Hunter Podcast with a matched set of antlers

Planning out of state hunts with LandTrust

Bridging the Gap: LandTrust’s Innovative Approach to Hunting Access and Conservation

In the realm of outdoor activities, access to private land for hunting and recreation has always been a significant challenge. Traditional methods of gaining access, such as leasing or personal connections, often come with limitations and barriers. Enter LandTrust, an innovative platform that is redefining the way hunters and outdoor enthusiasts engage with private land. A recent Okayest Hunter podcast episode featuring Nic De Castro, CEO of LandTrust, shed light on the company’s mission, its impact on the hunting community, and broader implications for conservation and access to outdoor activities.

LandTrust: A Solution to the Access Problem

LandTrust operates on a simple yet powerful premise: connecting landowners with those seeking access to private lands for hunting, fishing, and other outdoor activities. The platform addresses common concerns, such as insurance and respectful use of the land, creating a win-win scenario for both parties. Landowners can generate additional income from their land, while hunters and outdoor enthusiasts gain access to quality spots they otherwise might not have had.

The Importance of R3 in Hunting

The discussion also touched on the crucial topic of R3: Recruitment, Retention, and Reactivation of hunters. In an era where hunting faces various pressures, including societal attitudes and diminishing access to land, R3 initiatives are more important than ever. Platforms like LandTrust not only provide practical solutions to these challenges but also support the broader goal of sustaining and growing the hunting community. By improving access and offering new opportunities, LandTrust plays a pivotal role in ensuring the future of hunting and conservation.

Embracing Technology for Conservation

One of the most intriguing aspects of LandTrust is its embrace of technology to solve traditional problems. The platform offers a modern, user-friendly experience, allowing users to book access to private lands directly online. Features like game cam photo sharing and property updates keep users engaged and informed, enhancing the overall outdoor experience. This innovative approach not only makes hunting and outdoor activities more accessible but also fosters a deeper connection between people and the land.

LandTrust’s Impact and Future Directions

LandTrust’s impact extends beyond individual hunters and landowners. By facilitating responsible and respectful use of private lands, the platform contributes to conservation efforts and supports the economic viability of rural and agricultural communities. Looking ahead, LandTrust plans to introduce new features, such as a premium subscription service and enhanced property insights, further enriching the user experience and expanding access to outdoor activities.

Conclusion

The conversation with Nic De Castro from LandTrust offers valuable insights into the challenges and opportunities at the intersection of technology, conservation, and outdoor recreation. LandTrust’s innovative platform represents a significant step forward in solving the age-old problem of access to private lands for hunting and recreation. As the platform continues to grow and evolve, it holds the promise of fostering a more inclusive, accessible, and sustainable future for hunting and outdoor activities. By bridging the gap between landowners and outdoor enthusiasts, LandTrust is not just facilitating access to land; it’s nurturing a deeper appreciation for the natural world and the importance of conserving it for future generations.

Nic De Castro of LandTrust guests on the Okayest Hunter Podcast

Springtime on the Water

Contributor: Gary Maerz

It’s the end of February. The quest for Whitetail has ended. Sure, I could begin scouting the woods, look for sheds, and start planning for my autumnal mission. But to be honest, I am way more okayest as an angler than a hunter. While some may be planning for turkey, my mind tends toward trout; I cannot help but think about some of the amazing opportunities for spring fishing we can all enjoy. To be clear, the below noted timeframes are a general point of reference. The fishing described is more dictated by conditions than any given month. Regardless, anticipation will only be quelled by a spring on the water.

March Browns (Brooks and Bows)

Water temperatures start creeping back to the high 30s and day-dreaming about time on a river is in full swing. Start looking at stream reports for temperature and stream flow (cubic feet per second or cfs) trends to maximize the chance of success. Trout are back on the move after frigid waters begin warming, but turbidity is your enemy.


Look for increasing (or at least stable) temperatures and cfs trends that may indicate clearer water. Watch for stable stream flow or a period of high water followed by a precipitous drop to normal levels. These trends are indicators that possibly suggest clear/clearing water. Streamers and wooly-buggers are good choices with a fly line unless there is a notable hatch. Additionally, an attractor pattern such as a yellow-humpy has been successful. For ultra-light spinning gear, rooster tails, panther martins, and spoons (Thomas’ Little Tiger for me) do an excellent job of imitating protein packed baitfish.

I target larger trout with medium-light spinning gear as April rolls on. Warmer water has the biguns’ on the hunt; they are more than happy to smack a baitfish imitation. My favorite jerkbait presentation is a 4-4.5”, usually a trout pattern but any baitfish pattern is suitable, worked through current breaks, eddies, and slower water. A slow, steady retrieve with the occasional twitch will trigger strikes from bigger trout. Switch to a floating stick bait if the water is shallow and employ a similar retrieve. These techniques work on smaller trout as well but be sure to downsize your lures.

Bass assortment tackle

Pre-Spawn Smallmouth

April marches toward May and water temperatures climb into the upper 40s – low 50s. This is truly a special time of year. Big girls move out of their wintering holes and start feeding in shallower water: the smallmouth bass pre-spawn. Even the okayest fisherman has the opportunity to catch a giant.

The arduous task of pescatarian labor is about to begin. Before this, females pack on weight after the general austerity of winter before the eggs start to drop. Baitfish and crayfish (crawdads) will hold a special place on the menu. Jerkbaits (again) are a fantastic option for this time of year. Vary your retrieve until you determine which twitching cadence and pause length or retrieve speed will trigger the most strikes. This is the technique I have had the most success (and experience) with and is a confidence presentation to be sure.

Slow-rolled soft swimbaits and large curly-tail grubs also work well during this time of year. Additionally, many anglers will employ a jig with a crayfish trailer. I have not had a great deal of experience with a jig, but all those other anglers can’t be wrong; they are using jigs for a reason.

A Little Prespawn Chatter

Another great option for pre-spawn smallmouth is a chatterbait (or bladed jig). Don’t be afraid to use it as a search bait or as a follow-up to the jerkbait. A chatterbait mimics baitfish and/or crayfish and offers a bulkier profile than a jerkbait, coupled with significant vibration. And as is often typical of fishing with a chatterbait, quality reigns supreme over quantity and some of my largest smallmouth bass went for the chatterbait. For more information, forgive the shameless plug and see my BASSMASTER article, “A Little Prespawn Chatter” (April 2020).

Mixed Bags of May

A good portion of my time on the water has been spent on the Delaware River, specifically the region designated the Upper Delaware River which runs south from Hancock, NY to Port Jervis, NY. This fantastic fishery is home to several species such as trout, smallmouth bass, walleye, and a bountiful run of American shad. A peak time of year to fish the river falls between Mother’s Day and Memorial Day as a “Grand Slam” (or greater) is always possible. If you have a local river with a similar abundance of game species, be sure to verify its potential.

Trout and bass can be caught on the fly, spoons, spinners, and jerkbaits. Walleye can be caught on jerkbaits but crankbaits and soft plastics are also excellent choices (smallmouth also). Chain pickerel (sturdy “gators” known for drag screaming runs) are often a nice bonus during this time of year as well. Shad are typically caught with shad darts; colored jig heads often adorned with bucktail or feather. The variety of gamefish readily available at this time of year will keep you entertained and in the action.

Spring is Near

The grip of old man winter loosens, mother nature becomes a little more forgiving, and springtime fishing opportunities are a welcome distraction. I will relive springtime fishing moments until new experiences can manifest memories for next winter. See you on the water; tight lines.

Speed Goat hunting success

Antelope Hunting is far from Whitetail Hunting

Contributor: Will Bowen

I know whitetails. No, I’m not a biologist or a subject matter expert per say but I’ve spent a couple decades in the woods. I have been fortunate enough to experience almost everything a whitetail hunter can experience…except for killing a giant buck of course. But I’ve recently learned that being an adequate whitetail hunter doesn’t perfectly translate to being a good western hunter. 

This past August, I made my first attempt at hunting antelope in New Mexico, and let me tell you, it’s a completely different ballgame. Vast, open landscapes, lightning-fast quarry, and a lingering against-the-clock anxiety only added to the challenge. Antelope aren’t whitetails and if you are going to hunt them, you need to forget what you know. 

Stalking Speedgoats 

As the sun started to set on Friday, I was filled with nothing but confidence in the following day’s hunt. Saturday would be opening day of New Mexico’s first rifle season for antelope and we were sitting pretty. A half-a-day of sighting in rifles and scouting proved eventful considering we laid eyes on four or five good bucks. The plan was simple in my head. Return the next morning, find the goats, get close, and take the shot. As we all have come to find out, plans are often only easy on paper.

Saturday morning arrives and I’ve got my mind on the task at hand. Several of the bucks we spotted on Friday were in perfect spots, either along two-track banks or near brushy areas that would be perfect areas to make stalks. We would visit those first. We pulled up to the first area on the property and started glassing. It didn’t take long to find one of our targets but unfortunately, he had made his way onto the neighboring state-owned property (my tag is only good for private land). This buck would have to wait. 

We drove for several hours that morning looking for the other bucks that we bookmarked but with no luck. We were seeing antelope, just not the quality or in the area that we needed. I started to feel my first bit of anxiety. I thought this was going to be a for-sure thing this morning and I had only two days to hunt. I pushed back those thoughts and we decided to move on to the next property. This property, we hadn’t scouted the day before. 

We pulled into a massive greenfield and parked by the grain silos and farm shop in the corner. We had some slight elevation so this was a good glassing spot. A couple quick scans and we had found antelope everywhere, they were scattered however. We turned up several does and small bucks before finally finding a shooter. He wasn’t a giant but he had unique character with his left horn curling straight back instead of the usual inward lean. “I’ll take him” I said. He was in the wide-open field and a stalk would be difficult but we decided we should try. Maybe we could at least get within 300 yards of him. 

I was hunting with some newly acquainted cousins, Kyle and his wife Nicki. Considering they were raised in the area I was going to take every bit of advice I could get from them. The plan was for Kyle to drop us off and move the truck, while Nicki led me on a stalk towards the buck. We crawled for well over 150 yards before stopping to get a range on the buck. He was just over 300 yards but was starting to get nervous. I dropped to my belly and put my eye in the scope. The stiff wind was blowing my crosshairs all around the target. “No shot” I whispered to Nicki. About that time an ATV and a pickup truck passed on the gravel. The antelope bolted and were on the next property in a matter of seconds. 

I was filled with a mixture of disappointment and excitement. We were so close. He wasn’t a giant buck but he had some unique character. I would have loved to take him. We all convened back at the pickups and chowed down on some ham sandwiches for lunch. We spent the hour talking about what we had all seen. My dad and older cousin, Michael, had made another loop on some separate properties but had the same luck. After polishing off our sandwiches we decided to try a different property to the north. Maybe we could find some luck there. 

The next couple hours were spent without seeing many antelope, just scanning the grass and sage. Finally, we received the sign we were asking for. A call from my Michael and my dad lightened our mood, “big buck down!” We worked our way across the property to their location. When we got there, we could see the white belly laying in the distance. “How far?” I asked dad. He responded “well over 300.” That’s a crazy shot for a native Arkansan, where even seeing 300 yards can be a rarity. 

After recovering the buck, quartering him in the field, and throwing him on ice, we headed back towards the southern properties to find the afternoon goats we had seen the day before. We had a lot more energy and confidence this time-around. Dad’s buck was a giant and would end up only being a couple inches shy of the Boone & Crockett record minimum. It was going to be hard to beat that so I definitely wasn’t going to try. 

With only a few hours of daylight left, we spotted a bedded buck almost a half-a-mile behind the landowner’s house. We parked in position to get a spotting scope on him. He appeared big enough to stalk but we couldn’t make out any details. Kyle would accompany me on this stalk and would serve as my coach. The buck was approximately 600-700 yards away from our location. The above-knee-high haygrazer field would serve as good cover and would allow us to sneak towards the buck.

In order to cover some distance, we crouch-walked for the first 200 yards or so, trying to stay below the cover of haygrazer. We stopped to get a range on the buck and reset. He was still nearly 400 yards away. Now the stalk got a little more intense. We would crouch walk 20-30 yards at a time and stop to range the buck repeatedly. I led the front with my rifle and shooting sticks while Kyle crouched directly behind me with the range finder. 350 yards became 320, and 320 became 280. We were almost to where I felt comfortable. 

Suddenly the buck stands up and starts walking at an angle away from us. I started to panic. Kyle quickly interjected “if he’s moving or his head is down, just start steadily crouch-walking at him.” So, I did. This went on for a couple minutes when the buck suddenly stopped again. I dropped to my knees and found the buck in my scope. He was about 260 yards, within my range, but my increased heart rate and breathlessness made a shot impossible. “I’ve got to calm down a second” I said out loud. 

God must have seen it fit, because the buck, out of nowhere, turned and started walking towards us through the haygrazer. Step by step he closed the distance, and beat by beat I started to calm. On my final call for a range, the buck was 190 yards. “Money” I thought. I beared down on my crosshairs and put it right behind his shoulder. “Boom!” With a sound of the muzzle firing, I had my first pronghorn buck. As I approached the downed buck, I was met with a surprise, it was the same unique-horned buck that I stalked that morning almost two miles away. You can’t make this stuff up!

Pronghorn Hunting isn’t Whitetail Hunting

It was quickly apparent that I was out of my element. I’ve gathered tons of experience hunting whitetails but this was way different. Thankfully though the coaching of experienced antelope hunters and a little bit of luck, my dad and I were able to seal the deal. It can be done. If you are interested in chasing antelope, forget what you already know! Here is how antelope hunting differs from whitetail hunting. 

Stalking as Opposed to Ambushing

When you hunt whitetail, 90% of your time is spent waiting on a buck. You pick an ambush spot, and wait for him to come to you. While there is a small element of this in antelope hunting, the majority of your time is spent seeking antelope. And once you find one, you move to him. The average whitetail hunter has very little practice in the spot-and-stalk tactic. It’s completely different. Another thing to remember is that in antelope habitat, there is often very little cover to hide behind, so you might have to get creative. 

Long Range Marksmanship is a Must

As a whitetail bowhunter, most of my hunting marksmanship happens within 30 yards. I can’t say the same for antelope. The first thing my cousin Michael said when we arrived was “we are going to have to find a way to extend your range to 300 to 400 yards.” Even with an accurate shooting rifle, I’m not very confident in my ability to shoot that far. A few hours at the range will raise confidence but the best option is to try and close as much distance as possible. But like I mentioned in the story, I stalked the buck for hundreds of yards and still had to settle for a near 200 yard shot. 

You Have to Beat the Heat

Considering most antelope seasons are early in the fall or late in the summer, heat is definitely going to element that you have to face. Heat will affect you on multiple levels. First and foremost, you have to stay hydrated to ensure that you can perform at optimal levels, plus it’s a safety hazard. Secondly, you have to absolutely be prepared to take care of your harvest quick in order to prevent spoilage. We traveled with ice and quartered one of our bucks in the field to prevent this issue. You have to consider the possibility of extreme heat when antelope hunting. 

Antelope hunting is not deer hunting, that’s obvious now, but it’s one of the most fun hunts that I’ve ever experienced however. I hope that everybody reading this gets a chance to try it on their own one day. If you do, just remember to forget what you know and be ready to learn!

Three Things You Can Leverage to Access Prime Hunting Land

As we look back from 2024, reflecting on the ever-evolving landscape of deer hunting access and strategies, the journey has been nothing short of enlightening and humbling. The quest for that best hunting spot, the anticipation of deer season, and the stories that emerge, like Eric Clark’s memorable bow hunt in November 2022, where he tagged a wide-load river bottom buck, are the types of hunts that fuel the passion of hunters everywhere. These experiences not only highlight the thrill of the hunt but also underscore the importance of access to quality hunting land. Here are three strategies that Eric has used over the years to continue to elvate the pursuit of a shooter buck.

State Wildlife Agency Programs

State programs offering access to private lands for deer hunting have been a boon for hunters seeking new territories. These programs vary by state, so it’s crucial to stay informed about the offerings in your area. For instance, Wisconsin’s Managed Forest Law (MFL) and Voluntary Public Access (VPA) programs have continued to provide hunters with opportunities to explore private lands, fostering a symbiotic relationship between landowners and the hunting community. These initiatives not only support conservation efforts but also open up new realms for hunters to pursue their passion.

Cooperative Agreements

The success of cooperative agreements between states and private landowners has been instrumental in expanding access to prime hunting locations. These partnerships are tailored to balance the interests of landowners with the hunting community’s needs, offering a structured approach to accessing private lands. In Wisconsin, conservation organizations have played a pivotal role in this regard, securing lands for public use while ensuring sustainable hunting practices. The draw systems implemented by some of these organizations have proven effective in managing hunter density, enhancing the quality of the hunting experience for those drawn.

Day-Lease Apps and Digital Platforms

The digital revolution has brought about innovative solutions to the age-old challenge of finding hunting land. Day-lease apps, likened to an Airbnb for hunters, have emerged as a game-changer, offering flexible access to private lands. Platforms like LandTrust have demonstrated resilience and growth, adapting to the needs of the hunting community and landowners alike. Eric’s own venture, the Where to Hunt GPS app, now known as OUTLND®, aimed to complement these services by providing real-time information on occupied and unoccupied lands, enhancing safety and efficiency for hunters.

Eric Clark’s success story from 2022, leveraging digital tools to secure his spot and ultimately bagging a warrior river bottom buck, exemplifies the potential of combining traditional hunting skills with modern technology. It’s a testament to how innovation, coupled with a deep respect for the past time and the land, can lead to truly memorable hunting experiences.

As we move forward, the key to sustaining and enriching the hunting tradition lies in collaboration—between hunters, landowners, conservationists, and technology providers. Embracing new strategies, sharing knowledge, and supporting conservation efforts will ensure that the legacy of hunting thrives for future generations. Whether through state programs, cooperative agreements, or digital platforms, the opportunity to explore new horizons and create lasting memories in the great outdoors has never been more accessible.

Shooting Your Bow in Summer has Proven to Increase Your Odds of Success During Hunting Season

By Will Bowen | PUBLISHED June 29th, 2023

Every summer I start my practice sessions off the same way, shaky arms and loose groups. Am I terrible on the first session of the year? Not really, I’ve shot a bow for over two decades, so there is some inherit form there, but for my preferred hunting standards, yes…it’s pretty rough. I’d say the same goes for most bow hunters. As soon as hunting season ends, we all tend to put the bow on the hanger for a couple months. Some of us leave it up longer than that. A small offseason break is good but you don’t want to wait too long to break the bow back out and start shooting. 

I like to follow a basic practice routine and schedule during the summers. I start somewhere in late June or early July. This will give me about two and a half to three months of solid practice before the season starts. My personal progression is pretty simple and an easy one for novice archers to follow. The progression is as follows: perfect your form, hone your skills, and then harden your nerves. Pretty basic right? Let’s take a look at each step and break them down into the most important aspects.

How to Practice

Before we dive into each step we need to briefly discuss how to practice. Your shooting sessions should be brief. There is no need to shoot 500 arrows a day, this could possibly accentuate bad habits. Instead stick to 15-20 well thought out shots. Practice doesn’t make perfect, perfect practice makes perfect. Keeping your practice sessions short will force you to focus and make every arrow count. It also keeps weakness and shakiness from becoming an issue, therefore cutting down on the possibility that you develop bad habits. Want something else to fill your time? Do some archery specific exercises like theraband rows or shoulder blade retractions. It’s not shooting directly but it is beneficial to your archery success.

Perfect Your Form

This is how I like to start my shooting in the summer. I like to take the first two to three weeks perfecting my form. When you haven’t shot in a few months you can get pretty rusty. I like to start with a typical dotted bag or block target at 20 yards. Instead of focusing on stacking arrows on top of each other, really focus on your form. Proper back tension, proper riser grip, and proper trigger squeeze all need to be achieved on a consistent basis over the course of this period. Once you feel that you have achieved good, repeatable form, then we can start working on honing your archery skills. 

Hone Your Skills

Now we can focus on stacking arrows. Your form has been built and you’re ready to start mixing it up. The next three to four weeks will be spent shooting varied shots. Start changing up your distances and angles. If your max shooting distance during the season is 40 yards, practice at 50 and 60. It’ll make 40 feel like 25. And imagine what it’ll make 20 feel like! Also practice your in-between yardages (27, 34, etc.). This is a great opportunity to learn how your sight pins perform at variable distances. This is the core of your summer practice. Change it up, we are building skill now, not form. 

Harden Your Nerves

Finally in the last month or so before the season, it is time to start hardening your skill and your nerves. There is no better way to put ice in your veins than to shoot under pressure. First and foremost, shoot while people are watching. The added pressure of extra eyes scrutinizing your form is beneficial. It makes you focus and talk yourself through the pressure. Another way to pressurize the situation, while also adding a ton of fun, is to shoot in 3D competitions or shoot for dough in the yard. Get your buddies together on a weeknight and have an impromptu competition for $5 a guy. Nobody will put pressure on you like a buddy trying to win your money. The point in all this goofiness is to shoot at 3D targets, learn anatomy, and put pressure on yourself, that way when the actual pressure comes you’ll be prepared. 

This is how I plan to tackle my summer this year. The key is to have a plan and stick to it. Remember perfect practice makes perfect and consistency is the goal. Go into this fall being a better archer than you were last year. Let’s get shooting!

Remember, Don’t Forget Your Release

DIY Duck hunting boat

DIY Duck Hunting Boat Build From Start to Finish

There’s a common saying that boat stands for Bust Out Another Thousand (B.O.A.T.). Knowing that boats can become money pits is one of the main reasons some hunters prefer to head out to their local walk-in area or hitch a ride on a buddy’s boat instead. But what if I told you that you could build yourself a nice duck boat for under $5,000, and be able to access your local marsh or river?

With private land access becoming increasingly hard to come by, getting yourself out onto the water can greatly increase your hunting opportunities. Here in the state of Wisconsin, all navigable water is public. Article IX of the Wisconsin Constitution states that navigable waters are “common highways and forever free.” If you can access an area legally and keep your feet wet (or boat), you are good to go. 

I’ve built several of my own duck boats, and even went into detail recently on the UPDUCK podcast, about how I built my own duck hunting boat. My duck boat journey has been a great learning experience on many fronts. When I bought my first Jon boat in high school, I had no idea what I was doing. I learned by making mistakes and evolving my design through many years of duck hunting. If you are reading this blog and are interested in building your first duck boat, I hope this information will help make your journey a little less intimidating, and potentially save you a few dollars. 

I bought my first boat when I was 17 years old. 19 years later, I just finished building my 3rd duck boat.   My latest boat is a 1436 G3 flat bottom boat. For  Jon boats, 1436 means that the boat is 14 feet long and 36 inches wide at the bottom. I settled on a 1436 after considering the types of waters I wanted to navigate, the types of launches in my area, and the number of hunters/dogs I wanted to hunt with. There are many boat configurations to choose from, the important part is analyzing what areas you want to hunt, and then choose a size that best fits those spots. For me, I mostly hunt small rivers with boat “launches” that are usually comprised of dirt paths off the side of a bridge or road. Because of this, keeping my boat small and light was a requirement. In some situations, I have to pull my boat off the trailer onto the ground, and then drag it into the water. Doing this with anything bigger than a 1436 would not be feasible, especially if I’m hunting solo. 

I bought my boat off Facebook marketplace in summer of 2022. I drove down to the Land of Lincoln with cash in my pocket, and picked up an old fishing boat that was, coincidentally, used primarily at a cabin in northern Wisconsin. The hull was in good shape overall, but needed a fresh coat of paint. The trailer looked to be in good shape, but you’ll never know for sure until you start diving into your build. 

Purchase the boat and bring it home:

Materials: – Cash (Bank – $1200)

After I got the boat home, the first thing I did was pull the hull off the trailer for a thorough inspection of what I had just bought. Upon doing so, one of the trailer bunks snapped off and sent the boat toppling into the yard.

Fix the bunks and install new trailer lights:

Materials:Treated lumber (Hardware store)Bunk carpeting (Amazon – $22)Staples (Hardware store)Trailer light kit (Amazon – $27)

After the trailer was in better shape, it was time to start diving into the hull. I was fortunate enough to find a boat that still had factory paint, and was only used for fishing – us duck hunters tend to beat up our boats. However, the interior of the boat was scratched up and the paint worn off.  I liked the factory color of the boat, and wanted to re-paint the interior. After getting a crazy expensive quote from G3 for spray cans, I decided to head to my local hardware store and see what they had. I pulled off a handle from the boat and had it color matched at the store. I decided to try an ultra-flat Behr outdoor paint. Because my household is currently run by my two young children, I opted to save time and not strip the existing paint. I knew it wouldn’t last as long, but let’s be honest, I’ll just throw another coat on top once it wears off. 

Paint the hull:

Materials:Gallon of Ultra-Flat Behr Outdoor paint (Hardware store – $50)Cheap spray gun (Amazon – $30)Air compressor

After a few coats of paint, the boat was looking brand new again. It’s amazing how much a fresh coat of paint can take any old Jon boat and bring it back to life. As I mentioned above, my boat builds have evolved through the years, and I try and make upgrades along the way. For this build, I decided to try out Hydro-Turf. After talking with friends and fellow duck hunters, the Hydro-Turf seemed like a great way to make the boat safer, make the boat quieter, save the paint job, and overall make the boat look a little more badass. By no means is Hydro-Turf necessary, but it does have a lot of benefits. 

Install Hydro-Turf:

Materials:Hydro-turf sheet (Amazon – $150)Carpenters squareUtility knife 

With the Hydro-Turf installed, it was time to start electrical. Electrical is one of the most time-consuming parts of a boat build. It is very important to have a plan a head of time and know what types of lights, how many lights, and the location of said lights. With a small boat like mine, I didn’t have a need for anything besides lights and a way to start the motor. I wanted a light bar up front, a few interior lights, and navigation lights. I wired everything up to a 2-gang switch panel to run the interior and navigation lights separate from the light bar. This was important in the event you are passing someone in the dark. Some tips for electrical:

  • Run a bead of silicon caulk between the housing and the clear cover on your light bar. This will help it stay water-tight.
  • Use quick-connects for your wiring to save you time in the winter when you want to remove all of your lighting.
  • Research the wiring on your switch-panel in order to eliminate the permanent light that stays on even when you’re not using the lights. 

Install electrical:

Materials:Nilight 20” lightbar w/ harness (Amazon – $40)Nilight 2-gang switch panel (Amazon – $15)LED strip Nav lights (Amazon – $10)LED strip interior lights (Amazon – $14)3D printed switch box for panel ($0.30)Batteries (1 for lights, 1 for motor) – (Amazon – $120)Battery box (Amazon – $20) Electrical tubing (Amazon – $15)Wires/connectors/heat-shrink tubing, etc. (Amazon – $100)

The blind is a piece of the project that I went back and forth with. Because my boat is smaller, I wasn’t sure if it was worth constructing another home-made blind. On my previous boats, the blind did not function very effectively, and sometimes ended up being more of a hassle than it was worth. In some situations, you can either stand/sit in shallow water with a marsh stool or find an area that has some surrounding public land to sit on. Despite my best efforts to pass on building a blind, I decided to put another one together. In the end, I’m glad I did. On my last two boats, I’ve had success using Bimini top brackets and caps to construct a basic scissor-style blind. If you have ever been on a pontoon boat with a canopy, the framework is exactly like most boat blinds. The Bimini hardware easily attaches to electrical conduit, swivels to either side of the boat, and is easily removed from storage or transportation. Throw on some camo, and you’re ready to go. 

Build the blind:

Materials:Ø3/4 electrical conduit and elbows – (Hardware store – $100)Bimini top eye end caps (Amazon – $10)Bimini top deck hinges (Amazon – $16)Golf practice net – (Amazon – $40)Camo systems netting (Fleet Farm – $150)Raffia grass – (J. Stern – $40)Zip ties – (Hardware store -$10)

Now for the main course, the motor. My previous boat had a Swamp Runner longtail kit paired with a small 212cc predator motor. This set-up was a great starter kit, and got me where I needed to go. However, after buying a 2-foot longer boat, I knew I would need more horsepower. Captaining a “Thai” longtail kit is like steering the Titanic. Because of this, I decided to purchase a Backwater Inc. longtail kit. I headed over to my nearest Harbor Freight and picked up a new 459cc Predator motor. The Backwater kit is all American made, and it shows. This set-up was a huge upgrade from my Thai kit and pushes my 1436 at about 20MPH. 

Install the motor and longtail kit:

Materials:Backwater longtail kit – (Backwater inc. -$1400)Predator 459 motor – (Harbor Freight – $450)

Installing a grab bar was a minor upgrade to the boat, but one that required me to get creative. My previous boat had a grab-bar comprised of electrical conduit that was mounted behind the middle seat. My new boat is longer and did not allow me to swap it over. I decided I wanted a grab bar that swiveled down and out of the way for storage, so I purchased a grab bar directly from Backwater Inc. After I mocked up the mounting bracket on the side of the boat, I quickly learned that the sides did not have enough rigidity to support my weight hanging on the handle. I was determined to make the grab bar work, so I found a few pieces of aluminum angle iron, tied it into the ribs on the sidewall, and then celebrated with a beer. The build was complete!

Grab Bar:

Materials:Grab bar – (Backwater inc. – $175 )Angle iron (found in garage)

Time to hunt:

Materials:Duck boat rig: – (Total: $4,500)

Overall, I’m very pleased with how this build turned out. I was able to use the boat quite a few times this part waterfowl season, and never had any major issues (aside from sand eating my prop). If you decide to go down the duck boat build road, I hope you’ve learned a thing or two from my build.